Our crews are working as quickly as safety allows to restore power. At this time, icy weather conditions are preventing us from providing accurate restoration times. We apologize for this inconvenience.

Install Solar, Wind & More

Considering solar?

Start here to find out what questions you should ask, how to understand the process and how to choose a solar contractor.

Then learn about solar costs and incentives plus how solar is metered and billed (spoiler alert: It’s called Net Metering).

Wind

Most wind systems need a generator, inverter, tower and other smaller components. The average wind speed should be above 10 mph and wind generators usually need to be at least 30 feet above buildings, trees and other obstacles to eliminate turbulence.

Since zoning laws may apply, small wind systems are rarely suitable for urban residential areas. Most require at least an acre of land.

Visit Energy Trust of Oregon to calculate small wind costs, learn about incentives and tax credits, and find wind contractors.

Hydroelectric

Hydroelectric systems are cost effective relative to other types of renewable generation. They typically run nonstop, so a small generator can produce a lot of power.

Hydropower is dependent on water flow rates — gallons per minute — and “fall,” or the distance in feet that the water drops. Hydroelectric generators for Net Metering usually need a minimum flow of 12 GPM and a minimum fall of 3 feet. If you have more than 3 feet of fall, the minimum flow can be lower.

Energy Trust provides project support, including help with feasibility studies, and information about any available incentives and tax credits. The State of Oregon provides low-interest loans on hydro projects for individuals through its Energy Loan Program.

Other Self-Generation

Check Energy Trust for help with other self-generation, too, including geothermal energy